Pipe Metal Detector

pipe Metal Detector

the

the
• is made with transport piping system if the pipe diameter and the materials are produced in according to the type of the metal detector.
the
• tube-type metal detector is done with a pneumatically operated valve in the process of throwing out defective products.
the
• tunnel-type has the same structure as the metal detector.
the
• product properties of the material and the speed of transition is important in terms of the sensitivity of the detector.

product SYSTEMS RED

detected in a metal detector, which enables air to be taken out of the product metallised or mechanically operated systems. Like throwing paint marking on the product or system that performs the determination is incorrect.

specifications

the

the
• Supply Voltage: 220 V AC ± 10%
the
• Max Power: 15 W
the
• Dashboard: IP 65
the
• Sensor: IP 65 dkp sheet
the
• Sensor cable: LIYCY
the
• supply cable 2 x 1.5 mm
the
• Control relay: 10 amp Changeover.
the
• Warning relay: Changeover 6 amp.
the
• fault relay: Changeover 6 amp.
the
• LCD Digital display
the
• sensitivity and other settings, giving you the opportunity to do the numeric value ( 0 – 250 )
the
• noise setting ( to zero, for the reduction of environmental effects of radio – cable, etc )
the
• manual reset
the
• auto reset ( 0 – 60 sec )
the
• delay setting ( 0 – 60 sec )
the
• product effect adjustment ( 0 – 60 sec )
the
• Metal signal the possibility of counting and resetting on the LCD screen
the
• in the evening, electronic and mechanical -20 C to + 55 C can operate in the range.