Dual-Sensor Metal Detector

dual-sensor Metal Detector

the
• must be understood on two levels.
the
• to buy and on the bottom is attached.
the
• detects the metal in the material of the tape which passes over the top.
the
• a single sensor more sensitive than a metal detector.
the
• and in more places than the height of the material on the tape 10 cm are used. In terms of detection sensitivity detects metals up to 10 mm and above.
the
• as duyarlilikli sensitivity.
the
• is used in supply units are made in places where carrying over kinds dragline band
the
• tape the height of up to 800mm on the material used.
the
• Metal detection sensitivity of the sensor is inversely proportional to the range.
the
• increases the range of sensor detection sensitivity decreases, as decreases in December, the sensitivity rises.
the
• Metal Detector Control Panel digital display and setting operations are given with numerical values.
the
• setting system connection setting and product red noise false alarm, faulty product counting reset parameters are available.

SECTORS

mining, cement, Forestry, Industry, Chipboard, MDF, plastics recycling, paper used in the industry.

construction features Metal Detector

the
• 5 mm is manufactured from dkp sheet metal housing of the metal detector.
the
• suitable for bumps and severe operating conditions.
the
• easy to assemble and does not require structural changes in the system.
the
• warning metal detector and an alarm system are standard.
the
• Business Automation appropriate to the role independent 2 independent changeover is available.
the
• detects all kinds of metals ( IRON, CHROME, STAINLESS-etc).

specifications

the
• Supply Voltage: 220 V AC ± 10%
the
• Max Power: 15 W
the
• Dashboard: IP 65
the
• Sensor: IP 65 dkp sheet
the
• Sensor cable: LIYCY
the
• supply cable 2 x 1.5 mm
the
• Control relay: 10 amp Changeover.
the
• Warning relay: Changeover 6 amp.
the
• fault relay: Changeover 6 amp.
the
• LCD Digital display
the
• sensitivity and other settings, giving you the opportunity to do the numeric value ( 0 – 250 )
the
• noise setting ( to zero, for the reduction of environmental effects of radio – cable, etc )
the
• manual reset
the
• auto reset ( 0 – 60 sec )
the
• delay setting ( 0 – 60 sec )
the
• product effect adjustment ( 0 – 60 sec )
the
• Metal signal the possibility of counting and resetting on the LCD screen
the
• in the evening, electronic and mechanical -20 C to + 55 C can operate in the range.